Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

改进的Euler方法应用于非线性方程求根

本文通过引入动力系统，将改进的Euler方法应用于非线性方程求根问题，给出非线性方程求根的预估-再校正迭代格式，证明了该格式至少二阶收敛并可以调节参数达到超收敛。最后给出数值实验，数值结果验证了算法的有效性。     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于状态变换的数字电路冗余确认研究

以状态跳变图为基础,深入分析了冗余变换与非法变换的特征,提出结构冗余和功能冗余的概念,并讨论了可测故障、不可测故障和冗余之间的联系.最后结合验证和测试生成,提出状态冗余的隐含遍历确认策略.     

A computation procedure for the exact solution of location-allocation problems with rectangular distances

A method is presented to locate and allocate p new facilities in relation to n existing facilities. Each of the n existing facilities has a requirement flow which must be supplied by the new facilities. Rectangular distances are assumed to exist between all facilities. The algorithm proceeds in two stages. In the first stage a set of all possible optimal new facility locations is determined by a set reduction algorithm. The resultant problem is shown to be equivalent to finding the p-median of a weighted connected graph. In the second stage the optimal locations and allocations are obtained by using a technique for solving the p-median problem.     

压水型核反应堆功率控制系统的优化设计

在分析了压水型反应堆功率控制系统的前提下,针对其特殊的控制要求,运用基于输出反馈的次最优控制的设计方法和Matlab中的NCD模块,最终实现了系统的优化设计,并对系统进行了某一功率水平下的仿真试验和其它工况下的鲁棒性试验.结果表明,改进后的系统性能有了较大改善.     

液体火箭发动机涡轮泵健康监控系统

为了提高液体火箭发动机涡轮泵的安全性,降低其故障带来的破坏性,设计了某型液体火箭发动机涡轮泵健康监控系统(TP HMS),工程实现了TP HMS的测试硬件子系统、实时故障检测子系统、试车后数据分析子系统和实时数据库支持子系统等,讨论和分析了TP HMS的功能和执行流程,然后利用历史试车数据与转子试验平台数据对TP HMS中的多特征参量自适应阈值综合决策算法(MATA)进行了离线和实时在线验证;利用自适应时频谱对测试数据作进一步的分析。结果表明,MATA没有发生误检测情况,并具有实时故障检测的能力;自适应时频谱能有效抑制时频交叉项的干扰,准确给出故障信号的时间和频率信息。因此,TP HMS适合于液体火箭发动机涡轮泵健康状态监控。     

跳频电台自动测试系统设计

目前跳频电台的最好的检测方式是采取综合测试系统代替传统的测试仪器。以采样定理为基础,通过对三种跳频电台采样方案的比较得出结论,黑盒中频数字化方法是目前最合理的选择。给出了基于PCI总线构建跳频电台自动测试系统的硬件平台和软件测试方法。跳频电台自动测试系统可以完成对跳频电台指标的测试,并具有通用性。     

航空核辐射侦察信息更新率分析

分析了航空核辐射侦察信息的时序关系,结合相关测量设备的发展现状,认为更新率应以水平定位信息为准。分析了侦察过程中定位设备的各种工作状态,指出了其最优工作状态。最后在此工作状态下依据现实可用的定位设备给出了信息更新率。